1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5 Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

 More than 5 in stock

UFI 30 989 00 flat type air filter, paper filament in rubber surround

See SIA30361 for a reusable K & N air filter

 More than 5 in stock

 30113600 GU30113600 30 11 36 00
 3011 3600 3011.3600 30.11.36.00

14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.

This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters

 5 in stock

8 sided oil filter tool for new UFI filters

This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters

 1 in stock

Quick release coupling for fuel line, enables easier tank removal as QR connector can be located in a convenient location.

We recommend fitting this now before you snap the coupling on your fuel pump

 1 in stock

Gauze sump filter, retained by ENA95006

 2 in stock

 14152200 GU14152200 14 15 22 00
 1415 2200 1415.2200 14.15.22.00

1 litre of Rotra MP EP80/90 mineral based gear oil for gearboxes and drive boxes

Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. Surpasses API GL-5, MIL L 2105 D, MAN 342 type M1, MAN 342 type M2 (Approved)
Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

 This part is due back in stock soon, call 01484 841395 to reserve yours

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527